Brand New 2009 International 4300 4x2 Cab & Chassis
GENERAL INFORMATION
Manufacturer
International
Model Year
2009
Model
4300 4x2
Price
Request Quote
Color
White
Displacement
466 cc
Stock Number:
9H090297
Miles
909
Duty
Medium
Class
Class 7 (GVW 26,001-33,000 lbs)
CDL Required
Yes
WEIGHTS
GVWR
33000
BODY
Cab
Standard Cab
Air Conditioning
International Blend-Air With Integral Heater & Defroster
Power Steering
Sheppard M-100} Power
Frame
Heat Treated Alloy Steel (120,000 PSI Yield); 10.250" x 3.610" x 0.375" (260.4mm x 91.7mm x 9.5mm); 456.0" (11582mm) Maximum OAL
ENGINE & DRIVETRAIN
Engine Make
International
Engine Model
MaxxForce DT EPA 07, 245 HP 620 lb-ft Torque @ 1400 RPM, 2600 RPM Governed Speed, # 2 Bell Housing
Engine Type
Diesel, 4-Cycle
Horsepower
245 HP
Displacement
466 cc
Torque
620 lb-ft Torque @ 1400 RPM
Bore x Stroke
4.49 in. & 4.68 in. (11.7 cm & 11.9 cm)
Compression Ratio
16.4:1
Cylinders
6
Turbo
Yes
Starter
Delco Remy 42MT Type 450 12-Volt; with Thermal Over-Crank Protection
Fuel Type
Diesel
Fuel Tank Capacity
(2) Top Draw; D Style, Non Polished Aluminum, 50 U.S. Gal., Total Capacity 100 U.S. Gal., 378 L; 16" Tank Depth, Mounted Under Cab Left and Right Side
Transmission
AUTOMATIC Allison 2500_RDS_P 4th Generation Controls; Wide Ratio, 5-Speed, With Overdrive; On/Off Hwy; 33,000 lb GVW & GCW Max., With PTO Provision, Less Retarder
OPERATIONAL
Suspension
FRONT, SPRING Parabolic, Taper Leaf; 12,000-lb Capacity; With Shock Absorbers. Rear, SPRING, SINGLE Vari-Rate; 23,500-lb Capacity, With 4500 lb Auxiliary Rubber Spring.
Brakes
AIR BRAKE ABS Bendix AntiLock Brake System Full Vehicle Wheel Control System (4-Channel)
Wheels
FRONT DISC; 22.5" Painted Steel, 2 Hand Hole, 10 Stud (285.75MM BC) Hub Piloted, Flanged Nut, Metric Mount, 8.25 DC Rims; With Steel Hubs. REAR DUAL DISC; 22.5" Painted Steel, 2 Hand Hole, 10-Stud (285.75MM BC) Hub Piloted, Flanged Nut, Metric Mount, 8.25 DC Rims; With Steel Hubs.
Front Axle Capacity
International I-120SG I-Beam Type, 12,000-lb Capacity
Rear Axle Capacity
Dana Spicer 21060S Single Reduction, Hypoid Gearing, 21,000-lb Capacity, 200 Wheel Ends
Number of Rear Axles
Tandem
Rear End Ratio
5.29
Check for Overdrive
Has Overdrive
MEASUREMENTS
Wheelbase
254.0"
*Price, if shown, does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). Final actual sales price will vary depending on options or accessories selected.
NOTE: Models with a price of "Request a Quote" are always included in a $0 search, regardless of actual value.
